# Track Base Mount

Fastens a furniture base to one row of floor L-track with two double lug threaded studs. Nuts sit in covered pockets you reach from above. Printed feet level the far side.

[Open the configurator](index.html) · status: **draft**, version 0.1

A furniture base sits on one row of floor L-track and fastens with two double lug threaded studs. Each stud comes up into a pocket bored from the top of the base. The nut sits at the pocket floor, a printed sleeve lines the pocket and a printed lid covers it. Printed feet, leveling glides or a runner hold the far side level. Bases come in 3/4 in plywood, 1/2 in plywood or 1/4 in aluminum plate. The stud and track sizes are working numbers until they are measured.

## Settings

Grouped as Base, Track and studs, Far side, Pocket details. Every length takes mm or inches; the model works in mm.

## Presets

- **Cabinet on 3/4 ply**: 24 x 16 in, studs 16 in apart, flange nuts, fixed feet.
- **Wide unit with glides**: 36 x 20 in, leveling glides on the far side.
- **Aluminum plate base**: 1/4 in plate, nuts under printed caps, runner.
- **Flush track, short studs**: 1/2 in ply on 3/4 in studs in flush track.

## Exports

STL and 3MF from the 3D printing panel, plus a PNG still and settings JSON.

## Files

    index.html    page shell; loads the shared kit from ../../kit/
    model.js      settings, presets and build(), the geometry engine of record (JS, manifold-3d)
    model.json    title, summary, visibility, version and changelog
    thumb.png     catalog card art

Needs a network connection: three.js loads from a CDN, as on every kit page.

## License

© Ryan Mitchell — CC BY 4.0. See [LICENSE.txt](../../LICENSE.txt).