# Track Mount Ideas

Rough mockups of van furniture and gear on one row of floor L-track with two threaded studs. Each idea shows a different way to attach and build the base.

[Open the configurator](index.html) · status: **draft**, version 0.2

Rough mockups, not finished parts. Each idea shows a different way to attach to one row of floor L-track with two threaded studs and a different way to build the base, several of them lighter than a full sheet of plywood: a full ply cabinet, a ladder frame, an aluminum angle bench, slide on T pucks, a jug rack, a torsion box bench, a fridge slide, a battery tray, a table pedestal and three Packout tool box mounts. Each idea reports its base weight.

## Settings

Grouped as Idea, Size. Every length takes mm or inches; the model works in mm.

## Presets

- **24 x 16 in**: Studs 16 in apart, 18 in tall.
- **36 x 20 in**: Studs 28 in apart, 28 in tall.
- **18 x 14 in**: Studs 12 in apart, 13 in tall.

## Exports

STL and 3MF from the 3D printing panel, plus a PNG still and settings JSON.

## Files

    index.html    page shell; loads the shared kit from ../../kit/
    model.js      settings, presets and build(), the geometry engine of record (JS, manifold-3d)
    model.json    title, summary, visibility, version and changelog
    thumb.png     catalog card art

Needs a network connection: three.js loads from a CDN, as on every kit page.

## License

© Ryan Mitchell — CC BY 4.0. See [LICENSE.txt](../../LICENSE.txt).